HCD2 Series Industrial single-head embroidery machine: HCD2 series HCD2-1501-40

The 15 needle single head embroidery machine HCD2 is HappyJapan's best capable heavy-duty single head with the largest sewing area, durable drive system and speedy performances, enabling to deal with wide range of garments from delicate to thick and heavy.
Iron die-cast Arms and the body as one unit makes it strong and stable, promising high quality sewing.


●Color LCD touch screen control panel
●Single head 15 colors
●Maximum speed 1,200 r.p.m.
●Tubular Embroidery Area: 400x440mm
●Border Flat Embroidery Area: 400x520mm
         (HCD2-X1501: 400x1,200mm)
●Low-profile cap frame(option): 67x180mm
●Wide cap frame(option) : 67x290mm
●Free PC connection software
●LAN and USB network port
●USB memory stick port
●Built-in 100 small designs

●Easy threading
●Spiral tube for thread
●Take up lever safety protection
●Automatic thread trimmer
●Automatic color change
●Automatic thread break detection
●Short stitch sweep function
●Custermazable icons' locations
●Full Iron die-cast body

HCD2 Series Features

7 inch LCD Touch Screen Control Panel   Monogramming
  Slim Cylinder Arm  
Easy to use Touch screen control panel.   12 fonts and 6 sizes letters are available. Text Arch and circle is also editable.   The slim cylinder arm allows to embroider on pockets, sleeves, pants and children's wear


Rotary Thread Break Detector   Thread Adjusting Spring   Safety Head Cover Design  
The machine stops automatically when a thread breaks or bobbin thread becomes empty.   Thread adjust spring provides smooth upper thread supply to creat high-quality embroidery even at high-speed.    Safety head design protects operators from Take up levers during embroidery works.


Spiral Tube for Thread   Front Light   PC Connection Port  
Spiral tubes protect threads from tangling.   Bright LED lights illuminate the work area.   USB and LAN port for design data transfers and network machine operations.


Free Communication Software   Built-in 100 one point designs   Tracing Function  
Happy LINK: to connect a machine directly with PC for design transfer.
Happy LAN: to operate multiple Happy embroidery machines by one PC.
  Ready to use 100 design data. Enjoy the machine right after setting up:)   This function shows embroidery outer lines before starting, to ensure the needle won't hit the frame during a work


40,000,000 Stitches Memory Capacity    Guide Assistance Function      
999 design patterns and 40,000,000 stitches can be saved. Also preparations for each design can be memoraized.    The display assists by showing guidances for standard settings and operations.     



Clip-type Upper Thread Holder   Laser Position Marker   Safety Sensor  
Mechanical upper thread holders ensure to prevent thread tangling   Laser position marker shows an accurate needle position.   Safety sensor force to stops a machine operation when an object comes too close to the machine.


Bobbin Thread Winder   Cap Frame   One Point Frame  
An optional function for bobbin threads.   Wide Cap Frame: 67x290mm embroidery area
Low-profile Cap Frame: 67x180mm embroidery area.
This option frame comes with a setting device that makes preparation job quick and easy.
  Two frame selections: 55x76mm embroidery area is for one point logo on sleeves, T-shirts and rear side of caps; 55x40mm is suitable for pockets and slippers.


Shoe Clamp   Side Clamp   Manual Clamping Frame  
Shoe Clamp for logo and name embroideries on sports shoes. Embroiery area: 60x100mm   To hold a bag or other leather materials rigidly, Side Clamp is the best option. 140x220mm embroidery   Manual clamps for easy operations. Two size selections: 150x150mm and 150x300mm


Sock Frame   Various Frames   Borer Device  
Sock Frame can fit on Tubular Arms. This frame is suitable for socks, wrist band and small items.   Happy original various type of frames support various productions   Easy to install and use Happy Borer device is to spice up embroidery designs. This elevates your work of art to another level.


HCD2 Series Specifications